MODOS dispensing equipment
AUTOMATIC MONOCOMPONENT
ADHESIVE DISPENSING
EQUIPMENT FOR LAMINATION
NO MELTING PLATE DESIGN
• Accurate and reliable
• Clean and user friendly operation
• True melt on demand supply
• Maintenance trouble-free
• No melting plate
• In line g/m2 calculation
TRULY NEW WORKING PRINCIPLE BASED ON GEAR PUMPING TECHNOLOGY
The modos-200 equipment is the most advanced technical solution for dispensing mono-component adhesives, providing an easy usable and maintenance-free operation which were previously unattainable.
This accuracy is achieved by the well known gear pumping technology developed by lr.products) and controlled by an industrial PLC running a specific proprietary software
The lr.products) experience in gear pump technologies, allows the converting industry to have a simple and excellent equipment, with substantial improvements over any equipment based on a heated piston or a meting plate
The modos-200 equipment is the most advanced technical solution for dispensing mono-component adhesives, providing an easy usable and maintenancefree operation which were previously unattainable.
This accuracy is achieved by the well known gear pumping technology developed by lr.products) and controlled by an industrial PLC running a specific proprietary software.
- It is possible to interrupt the dosing and the return to dosing.
- The remaining adhesive not used in the drum will not deteriorate.
- It is not necessary to clean the equipment during shutdowns.
- Neither the hose nor the metering pump need cleaning.
- The adhesive in the drum is consumed to the maximum, practically without residual.
- Drums with dents or blows can be used.
- Suitable for drums with or without internal plastic bag. –
- Independent controls for temperature in 4 sectors.