MODOS dispensing equipment
NEW TECHNOLOGY AUTOMATIC EQUIPMENT FOR THE DOSAGE OF LAMINATION MONOCOMPONENT ADHESIVE
TRULY NEW WORKING PRINCIPLE BASED ON GEAR PUMPING TECHNOLOGY
- Accurate and reliable
- Clean and user friendly
- Without heated plunger
- Maintenance free
- Production control
- Online g/m2 calculation
The modos-200 equipment is the most advanced technical solution for dispensing mono-component adhesives, providing an easy usable and maintenance-free operation which were previously unattainable.
This accuracy is achieved by the well known gear pumping technology developed by lr.products), controlled by an industrial PLC running a specific self-designed software.
The lr.products) experience in gear pump technologies, allows the converting industry to have a simple and excellent equipment, with substantial improvements over any equipment based on a heated piston or a meting plate.
Modos-200 equipmentThe modos-200 equipment is the most advanced technical solution for dispensing mono-component adhesives, providing an easy usable and maintenance-free operation which were previously unattainable.
Gear pumpingThis accuracy is achieved by the well known gear pumping technology developed by lr.products), controlled by an industrial PLC running a specific proprietary software.
Dosing nozzle and adhesive hose are both temperature controlledIt is possible to interrupt the dosage and dose again.
The remaining adhesive not used in the drum will not deteriorate.
It is not necessary to clean the equipment during shutdowns.
Neither the hose nor the metering pump need cleaning.
The adhesive in the drum is consumed to the maximum, practically without residual.
Drums with dents or blows can be used.
Suitable for drums with or without internal plastic bag.
Independent controls for temperature in 4 sectors.